Spectral Systems

Spectral Systems, LLCについて

Spectral Systemsは、Frank Wesleyによって30年以上前に設立され、赤外線アプリケーション用の特殊光学機器を製造している。赤外線光学部品、コーティング、システムインテグレーションの提供に重点を置いている。

当社はSpectral Systemsの代理店です。

赤外線ウィンドウ
Infrared Windows

赤外線ウィンドウ

Spectral Systemsは、赤外線サンプリング用の幅広い種類の窓を提供しています。同社のウィンドウは業界最高水準の品質を誇り、卓越した分光測定結果をもたらします。

形状 円形 長方形
光学硝材 直径x厚さ(mm) 特殊コーティング 縦x横x厚さ(mm) 特殊コーティング
Al2O3 13 × 2
〜 25 × 2
AMTIR 13 × 2
〜 32 × 3
BaF2 13 × 2
〜 50 × 3
30 × 15 × 4
〜 38 × 19 × 4
CaF2 13 × 2
〜 50 × 3
25 × 12 × 2
〜 38 × 19 × 4
CdTe 12 × 1
〜 50 × 3
CsI 13 × 2
〜 32 × 3
Ge 13 × 2
〜 50 × 3
XP-BBAR Coated (2 – 14 micron)
XP-NBAR Coated (8 – 12 micron)
30 × 15 × 4
〜 38 × 19 × 4
IR Quartz 32 × 3
KBr 6 × 1.5
〜 50 × 3
XP-Halide Coated for Humidity Protection
XP-Polymer Coated for Humidity Protection
Wedged
25 × 25 × 4
〜 38 × 19 × 4
XP-Halide Coated for Humidity Protection
XP-Polymer Coated for Humidity Protection
KRS-5 32 × 3
NaCl 13 × 2
〜 50 × 3
XP-Halide Coated for Humidity Protection
XP-Polymer Coated for Humidity Protection
25 × 12 × 2
〜 41 × 23 × 6
XP-Halide Coated for Humidity Protection
XP-Polymer Coated for Humidity Protection
Polyethylene 32 × 3
Si 13 × 2
〜 38 × 6
ZnS 13 × 2
〜 50 × 3
ZnSe 13 × 2
〜 50 × 3
XP-BBAR Coated (2-14 micron)
Wedged, XP-BBAR Coated (2 – 14 micron)
XP-NBAR Coated (8 – 12 micron)
30 × 15 × 2
〜 38 × 19 × 2

液体セル
Liquid Cells

液体セル

Spectral Systemsは、赤外線サンプリング用の液体セルを3種類提供しています。定量分析における再現性を最適化するスーパーシール型液体セル、柔軟な取り付けと定量分析における再現性を実現する自立型シール液体セル、そしてサンプリング光路長の柔軟性を最大限に高める着脱式液体セルです。

スーパーシールド液体セル
Super-Sealed™ Liquid Cells

Super-Sealed Liquid Flow Cells
(スーパーシールド液体フローセル)
Super-Sealed Liquid Cells
(スーパーシールド液体セル)
RoHS Super-Sealed Liquid Cells
(RoHS スーパーシールド液体セル)
光学硝材 CaF2
ZnSe
BaF2, CaF2, CsI, IR Quartz
KBr, KRS-5, NaCl, ZnS, ZnSe
BaF2, CaF2, CsI, IR Quartz
KBr, KRS-5, NaCl, ZnS, ZnSe
RoHS Compliant Yes
Plate Geometry Rectangular
Plate Dimension 2.0” W x 3.0” H
IR Beam Port Geometry Oblong Circular
IR Beam Port Diameter 18 mm W × 25 mm H 13 mm
Nominal Pathlength ±10% guaranteed
Calibrated Pathlength Optional
Seal Type Proprietary, leak free Proprietary, leak free, fluoropolymer
Fill Port Type Luer Lock
Window Flatness λ/5 at 10.6 micron λ/5 at 10.6 micron
(Except KRS-5, Ten Wave at 633 nm)
λ/5 at 10.6 micron

液体セル
Liquid Cells

Free-Standing Liquid Cells(フリースタンド液体セル) Demountable Liquid Cells(取外し可能液体セル)
Free-Standing Liquid Cells(フリースタンド液体セル) Free-Standing Liquid Cells(フリースタンド液体セル) Demountable Liquid Cells(取外し可能液体セル)
光学硝材 BaF2, CaF2, CsI, IR Quartz
KBr, KRS-5, NaCl, ZnS, ZnSe
BaF2, CaF2, CsI Ge, IR Quartz, KBr,
KRS-5, NaCl, Polyethylene, Si, ZnS,
ZnSe
形状 Circular Rectangular
サイズ 32 mm 2.0″ W × 3.0″ H
IR Beam Port Geometry Circular
IR Beam Port Diameter 13 mm 9.5 × 21 mm
Nominal Pathlength ±10% Spacer thickness
Seal Type Proprietary, leak free Friction/Te on
Fill Port Type Luer Lock or tubular (1/8″ OD) Luer Lock
Window Dimensions 32 × 3.0 mm circular
Window Flatness λ/5 at 10.6 micron (Except KRS-5) λ/5 at 10.6 micron
(except KRS-5 and Polyethylene)

ATR光学素子
ATR Optical Elements

ATR光学素子

Spectral Systemsは、赤外線サンプリング用の包括的なATR結晶セットを提供しています。同社は、ATRアプリケーションの性能と赤外線透過率を最適化するATRコーティングに特化しています。また、独自のATR結晶を製造・設計しています。

光学硝材 サイズ 形状
AMTIR 50 × 20 × 2 〜 80 × 10 × 3 45° Trapezoid
45° Trap, Aluminized TROUGH
60° Trap, Aluminized TROUGH
Amorphous material transmitting IR (AMTIR) has very low water solubility and good chemical
resistance – particularly to acids. It generally performs well in a pH range of 1-9. Although AMTIR
contains arsenic and selenium, it is generally considered safe to handle. Coated versions of their AMTIR
ATR crystals are available for improved IR throughput and enhanced seal within the ATR crystal plate.
Ge 50 × 10 × 1 〜 80 × 10 × 3 45° または 60° Trapezoid
45° Parallelogram
45° または 60° Trapezoid XP-BBAR
45° または 60° Trap, Aluminized FLAT
30° または 45° または 60° Trap, Aluminized TROUGH
45° Aluminized FLAT
45° Aluminized TROUGH
Germanium (Ge) is a high refractive index material (4.0 @ 10 microns) which provides shallow
depth of penetration useful in some ATR applications. It is relatively hard and resistant to most acid
and basic samples. The long wavelength cutoff of Ge will limit spectral range for multiple reflection
ATR crystals to about 700 cm (depending upon pathlength). Coated versions of our Ge ATR crystals are
available for improved IR throughput and enhanced seal within the ATR crystal plate.
KRS-5 50 × 10 × 3 〜 50 × 20 × 3 45° Parallelogram
45° Trapezoid
Thallium Bromoiodide (KRS-5) ATR crystals are a medium refractive index material (2.37 @ 10
microns) with excellent long wavelength coverage in the infrared spectral region. It is non-hygroscopic
with very good chemical resistance; however, KRS-5 will occasionally exhibit cold flow behavior. KRS-5
is extremely toxic and is absorbed through the skin and should only be handled with glove protection.
Si 50 × 10 × 2 〜 80 × 10 × 4 45° Trapezoid
45° または 60° Parallelogram
45° Aluminized TROUGH
ZnS 50 × 20 × 2 〜 80 × 10 × 3 45° Trapezoid
30° または 55° Aluminized TROUGH
Zinc sulfide (ZnS) is a relatively hard material and is resistant to thermal and mechanical
shock. It is insoluble in water but can be attacked by strong acids and bases. ZnS is classed as a GRAS
material. Its spectral range is more limited than ZnSe in the long wavelength region. Coated versions of
their ZnS ATR crystals are available for improved IR throughput and enhanced seal within the ATR crystal
plate.
ZnSe 25 × 10 × 3 〜 80 × 10 × 3 30° または 45° または 60° Parallelogram
45° または 60° Trapezoid
45° Trapezoid, XP-BBAR
40° または 45° または 60° Trap, Aluminized FLAT
40° または 45° または 55° または 60° または 70° Trap, Aluminized TROUGH
45° Aluminized FLAT
45° Aluminized TROUGH
Zinc selenide (ZnSe) is a widely used ATR crystal material and is a relatively hard and
brittle material. It is insoluble in water but is attacked by strong acids and bases. ZnSe has a good
mid-IR spectral range reaching to about 630 cm-1 for multiple reflection ATR crystals at the long
wavelength side of the spectrum (depending upon IR beam pathlength). Coated versions of their ZnSe ATR
crystals are available for improved IR throughput and enhanced seal within the ATR crystal plate.

赤外線光学素子
Infrared Optical Elements

spectralSys_infraredOpticalElements

Spectral Systemsは、球面および非球面赤外線光学素子の設計・製造におけるリーディングカンパニーです。

Field Lenses
(フィールドレンズ)
Hemispherical Immersion Lenses
(半球型液浸レンズ)
Medium Focus Medium Speed Lenses
(ミディアムフォーカス・ミディアムスピード・レンズ)
spectralSys_fieldLenses spectralSys_hemisphericalImmersionLenses spectralSys_mediumFocusLenses
光学硝材 ZnSe Ge ZnSe ZnSe Ge BaF2 KBr
直径(mm) 6.35, 12.7, 25.4
(F#1)
12.7, 25.4
(F#1)
6 (R = 3),
10 (R = 5)
12.7, 25.4
(F#3)
40(4.88″ EFL),
50(2.35″ EFL)
特殊コーティング F#1, XP-BBAR coated XP-BBAR coated XP-BBAR coated protective coated

赤外線光学コーティング
Infrared Optical Coatings

spectralSys_infraredOpticalCoatings

Spectral Systemsは、分光分析用赤外線光学コーティング分野のリーディングカンパニーです。同社のコーティングは、屈折光学部品や反射光学部品に適用され、反射率や透過率の向上、高湿度からの保護、摩耗からの保護、製造性の向上を実現します。

Reflective Mirror
Coatings
Protective
Coatings
Beamsplitter
Coatings
Anti-Reflective
Coatings
Aluminum Front Face Reflector
Gold Front Face Reflector
CERAMSpec
KBr XP-Halide, 0.4 – 28 μm
XP-Polymer
BaF2 Photon Pro 2 – 12 μm Al2O3 XP-NBAR 0.8 – 2.5 μm
CaF2 Photon Pro 0.6 – 10 μm AMTIRTM XP-BBAR 2 – 20 μm
CsI Photon Pro 2 – 50 μm CdTe XP-BBAR 1.8 – 20 μm
KBr Photon Pro 0.6 – 28 μm Diamond XP-BBAR 2.6 – 20 μm
Quartz Photon Pro 0.6 – 3.6 μm Quartz XP-NBAR 0.8 – 1.1 μm
ZnSe Photon Pro 0.6 – 20 μm Ge XP-NBAR 2 – 14 μm
Ge XP-BBAR 2.5 – 20 μm
Si XP-NBAR 2 – 5 μm
ZnS (CleartranTM) XP-BBAR 2 – 14 μm
ZnSe XP-BBAR 1.1 – 20 μm
ZnSe XP-NBAR 0.6 – 14 μm

赤外線ビームスプリッター
Infrared Beamsplitters

spectralSys_infraredBeamsplitters

Spectral Systemsは、FT-IRビームスプリッターのコンポーネントおよびサブアセンブリの大手メーカーです。同社のビームスプリッターコーティングは、高い性能と卓越したスペクトル純度を実現するように設計されています。さらに、同社のビームスプリッター製品は、真空紫外域から遠赤外域までのスペクトル領域をカバーしています。

Photon Pro CaF2 Beamsplitters Photon Pro KBr Beamsplitters Photon Pro ZnSe Beamsplitters
25 × 2 〜 57.15 × 6 mm 25 × 2 〜 72 x 10 mm 25 × 2 〜 69.85 × 8 mm
0.6 – 9.0 μm 1 – 28 μm 2 – 20 μm

赤外線フィルター
Infrared Filters

標準長波長通過フィルター
STANDARD LONG WAVE PASS FILTERS

spectralSys_standardLongWavePassFilters

Filter Thickness 1.0 ± 0.2mm
Diameter Tolerance ±0.1mm
Min. Clear Apeture 90% of outside dimension
Substrate Material Silicon or Germanium
Flatness 3-5 waves at cut-on W/L
24-Hour Humidity per MIL-C-48497A
Operating Temp -62°C to +71°C
Parallelism <10 arc minutes
Transmission (Ave) >85% from 1.05 x cut-on to 2.0 x cut-on
Rejection (Ave) <0.1%
Slope <7% (12% for 1.05 μm lter)

標準赤外線バンドパスフィルター
STANDARD INFRARED BANDPASS FILTERS

spectralSys_standardInfaredBandpassFilters

直径 25mm or 50mm
Diameter Tolerance +0/-0.1mm
Min. Clear Apeture 21mm
Substrate Material Al2O3, Si, Ge
Thickness 1.0mm
Thickness Tolerance ± 0.2mm
Transmission (Typical) 60-80%
Blocking t<0.1% average to 30 μ
24-Hour Humudity Per MIL-C-48497A
Moderate Abrasion Per MIL-C-48497A
Adherence Per MIL-C-48497A

赤外線ニュートラルデンシティフィルター
INFRARED NEUTRAL DENSITY FILTERS

spectralSys_infraredNeutralDensityFilters

Filter Thickness 1.0 ± 0.2mm
Diameter Tolerance ±0.2mm
Min. Clear Apeture 90% of outside dimension
Substrate Material Germanium
Optical Flatness 3-5 waves per inch
Optical Parallelism 10 arc minutes or better
Spectral Range 5500 to 400 cm-1
Surface Quality 80/50 per MIL-0-13830B
Coating Quality 80/50 per MIL-0-13830B
Coating Adherence Per MIL-M13508C
Humidity Per Mil-STD-810F

製品の販売実績

アカデミック

  • 奈良先端科学技術大学院大学