仕様
| Gap-Free Tuning Range | λ ≈ 5.4 – 12.8 µm (Δν > 1050 cm-1) (typical) (system can be configured with up to 4 tuners) |
| Spectral Linewidth | 2 cm-1 (typical) |
| Spectral Accuracy / Repeatability | < 2 cm-1 / < 0.5 cm-1 (typical)* |
| Maximum Peak Power | 150 mW (typical for 4 tuners, see tuning curve) |
| Average Power | 0.5 – 10 mW typical at 5% duty-cycle |
| Power Stability | < 10% pulse-to-pulse (typical) |
| Pulse Width | 30 – 300 nsec ▫ continuously variable with External Pulse Control ▫ 10-ns-resolution with Int. & Ext. Triggerin |
| Pulse Repetition Frequency | Up to 3 MHz |
| Maximum Duty Cycle (DC) | 2.5 – 15% (depending on pulse width, period, & tuner) |
| Beam Quality | Single spatial mode |
| Beam Diameter | 2 x 4 mm, collimated output |
| Beam Divergence | < 5 mrad |
| Pointing Stability | < 1 mrad over 99% of tuning range |
| Polarization | Vertically polarized, 100:1 extinction |
| Tuning Modes | Move Tune – manual control at one wavelength |
| Step Tune – programmable linear steps | |
| Sweep Tune – variable sweep speed | |
| Step Tune Speed | 100 cm-1 step in <15 msec |
| Sweep Tune Speed | Linear sweep up to 15 cm-1/msec |
| Computer Control | Ethernet; HTML/SOAP interface |
| Synchronous Pulse Control | Trigger input – with Sync-Out and adjustable offset |
| Trigger output – for laser pulse & wavelength tune | |
| Digital input for pulse control – directly controls rising & falling edges ** |
|
| Dimensions | Approx. 6.25 × 5 × 4.9 inches Volume = 2.6 liters |
| Weight | 2 kg (4.5 lbs) |
| Cooling | Active cooling via fans |
| Temperature Range (Operating / Storage) |
10 to 30 °C / -10 to 70 °C |
| Electrical Power | 100 – 240 Volts (50/60 Hz) 2.5 Amp |
| * At 25°C with temperature stabilization | ** For HDMI support contact factory |
